KORADO, a.s.KORALUX LINEAR CLASSIC - M - Towel Rail Radiator with Middle Connection
Description
Towel rail radiator KORALUX LINEAR CLASSIC - M with the middle connection is produced from closed steel profiles with a square and circular cross-section. Its design enables drying of textiles. The radiators are delivered with the set of brackets for wall mounting, including an air vent and blanking plug.
They can be equipped with an electric heating element with or without an integrated temperature controller.
For connection of the radiator to the heating system we recommend to use the Connection fittings HM (
PDF, 2,89 MB).
- Combined Heating
- Heat output and basic technical parameters ( PDF, 191 kB)
Technical Data
Steell round tubes ø 20 mm |
Height H | 930, 1340, 1675 mm | |
| Length L | 450, 600, 750 mm | ||
| Depth B | 30 mm | ||
| Connecting pitch | 50 mm | ||
| Connecting thread | 6 x G½ inside | ||
| Maximum working pressure | 10 bar | ||
| Test pressure | 13 bar | ||
| Maximum working temperature | 110 °C | ||
| Flow coefficient | AT = 9,75 . 10-5 m² | ||
| Coefficient of resistance | ξT = 8,5 |
Mounting
The mounting set is delivered as standard and consists of 4 special plastic brackets, screws, dowels and mounting instructions.
On request a special mounting set for fixing in space can be delivered which enables to fix the radiator perpendicularly to the wall. In this case the radiator is fixed both to the wall and to the floor.
Overview of Types
| Type KLCM 1675 | Type KLCM 1340 | Type KLCM 930 |
|---|---|---|
 |
 |
 |
Pressure Loss
The pressure loss of the radiator for the respective working conditions can be calculated by means of the value of the flow coefficient AT or the resistance coefficient ξT (see please the Technical Parameters).
