KORADO, a.s.KORALUX LINEAR PLUS - Towel Rail Radiator
Description
Towel rail radiator KORALUX LINEAR PLUS is produced from closed steel profiles with the D-shape cross-section and profiles with a circular cross-section. Its design enables drying of textiles. The connecting pitch is derived from the length of the radiator. The radiators are delivered with a set for wall mounting, including an air vent and blanking plugs.
They can be equipped with an electric heating element with or without an integrated temperature controller.
- Combined Heating
- Heat output and basic technical parameters (
PDF, 188 kB)
Technical Data
Steell round tubes ø 24 mm |
Height H | 764, 1204, 1820 mm | |
| Length L | 450, 600, 750 mm | ||
| Depth B | 35 mm | ||
| Connecting pitch | h = L - 50 mm | ||
| Connecting thread | 4 x G½ inside | ||
| Maximum working pressure | 10 bar | ||
| Test pressure | 13 bar | ||
| Maximum working temperature | 110 °C | ||
| Flow coefficient | AT = 1,8 . 10-4 m² | ||
| Coefficient of resistance | ξT = 2,5 |
Mounting
The mounting set is delivered as standard and consists of 4 special plastic brackets, screws, dowels and assembly instructions.
On request a special mounting set for fixing in space can be delivered which enables to fix the radiator perpendicularly to the wall. In this case the radiator is fixed both to the wall and to the floor.
Overview of Types
| Type KLP 1820 | Type KLP 1204 | Type KLP 764 |
|---|---|---|
 |
 |
 |
Pressure Loss
The pressure loss of the radiator for the respective working conditions can be calculated by means of the value of the flow coefficient AT or the resistance coefficient ξT (see please the Technical Parameters).
