KORADO, a.s.KORALUX LINEAR - Towel Rail Radiator
Description
Towel rail radiator KORALUX LINEAR is produced from closed steel profiles with a square and circular cross-section. Its design enables drying of textiles. The connecting pitch is derived from the length of the radiator. The radiators are delivered with a set for wall mounting, including an air vent and blanking plugs.
It can be equipped with an electric heating element with or without an integrated temperature controller. The direct electric radiator KORALUX LINEAR - E is also available.
PDF, 102 kB)Technical Data
Steell round tubes ø 24 mm |
Height H | 780, 1200, 1830 mm | |
| Length L | 450, 600, 750, 1000 mm | ||
| Depth B | 35 mm | ||
| Connecting pitch | h = L - 35 mm | ||
| Connecting thread | 4 x G½ inside | ||
| Maximum working pressure | 10 bar | ||
| Test pressure | 13 bar | ||
| Maximum working temperature | 110 °C | ||
| Flow coefficient | AT = 1,8 . 10-4 m² | ||
| Coefficient of resistance | ξT = 2,5 |
Mounting
The mounting set is delivered as standard and consists of 4 special plastic brackets, screws, dowels and mounting instructions.
On request a special mounting set for fixing in space can be delivered which enables to fix the radiator perpendicularly to the wall. In this case the radiator is fixed both to the wall and to the floor.
Overview of Types
| Type KL 1830 | Type KL 1200 | Type KL 780 |
|---|---|---|
 |
 |
 |
Pressure Loss
The pressure loss of the radiator for the respective working conditions can be calculated by means of the value of the flow coefficient AT or the resistance coefficient ξT (see please the Technical Parameters).
