KORADO, a.s.KORALUX RONDO PLUS - M - Towel Rail Radiator with Middle Connection
Description
Towel rail radiator KORALUX RONDO PLUS - M is produced from closed steel profiles with the D-shape cross-section and profiles with a circular cross-section. Its design enables drying of textiles and it is modified for bottom middle connection with the connecting pitch of 50 mm. The radiators are delivered with the set of brackets for wall mounting, including an air vent and blanking plug.
They can be equipped with an electric heating element with or without an integrated temperature controller.
For connection of the radiator to the heating system we recommend to use the Connection fittings HM (
PDF, 2,89 MB).
- Combined Heating
- Heat output and basic technical parameters ( PDF, 188 kB)
Technical Data
|
Steell round tubes ø 24 mm |
Height H | 764, 1204, 1820 mm | |
| Length L | 450, 600, 750 mm | ||
| Depth B | 58, 68, 78 mm | ||
| Connecting pitch | 50 mm | ||
| Connecting thread | 6 x G½ inside | ||
| Maximum working pressure | 10 bar | ||
| Test pressure | 13 bar | ||
| Maximum working temperature | 110 °C | ||
| Flow coefficient | AT = 0,98 . 10-4 m² | ||
| Coefficient of resistance | ξT = 8,5 |
Mounting
The mounting set is delivered as standard and consists of 4 special plastic brackets, screws, dowels and assembly instructions.
| L (mm) | 450 | 600 | 750 |
|---|---|---|---|
| b (mm) | 92 ÷ 112 | 102 ÷ 122 | 112 ÷ 132 |
Overview of Types
| Type KRPM 1820 | Type KRPM 1204 | Type KRPM 764 |
|---|---|---|
 |
 |
 |
Pressure Loss
The pressure loss of the radiator for the respective working conditions can be calculated by means of the value of the flow coefficient AT or the resistance coefficient ξT (see please the Technical Parameters).
