KORADO, a.s.KORALUX RONDO - Towel Rail Radiator
Description
Towel rail radiator KORALUX RONDO is produced from closed steel profiles with an oval and circular cross-section. Its design enables drying of textiles. The connecting pitch is derived from the length of the radiator. The radiators are delivered with a set for wall mounting, including an air vent and blanking plugs.
They can be equipped with an electric heating element with or without an integrated temperature controller. The direct electrical radiator KORALUX RONDO - E is also available.
PDF, 191 kB)Technical Data
Steell round tubes ø 24 mm |
Height H | 780, 1200, 1830 mm | |
| Length L | 450, 600, 750 mm | ||
| Depth B | 66, 76, 86 mm | ||
| Connecting pitch | h = L - 35 mm | ||
| Connecting thread | 4 x G½ inside | ||
| Maximum working pressure | 10 bar | ||
| Test pressure | 13 bar | ||
| Maximum working temperature | 110 °C | ||
| Flow coefficient | AT = 1,8 . 10-4 m² | ||
| Coefficient of resistance | ξT = 2,5 |
Mounting
The kit supplied for fastening the radiator to the wall contains 4 special plastic consoles, wood screws, dowels, and assembly instructions.
Overview of Types
| Type KR 1830 | Type KR 1200 | Type KR 780 |
|---|---|---|
 |
 |
 |
Pressure Loss
The pressure loss of the radiator for the respective working conditions can be calculated by means of the value of the flow coefficient AT or the resistance coefficient ξT (see please the Technical Parameters).
