KORADO, a.s.KORALUX LINEAR CLASSIC - Towel Rail Radiator
Description
The towel rail radiators KORALUX LINEAR CLASSIC are produced from closed steel profiles with a D-shaped cross section and straight profiles with a circular cross section. The connecting pitch is derived from the length of the radiator. The radiators are delivered with a set for wall mounting, including an air vent and blanking plugs.
They can also be used for combined heating.
The direct electric radiator KORALUX LINEAR CLASSIC – E is also available.
Their design enables the drying of textiles. This is why the KORADO offer now includes towel hangers and pegs which extend the practical use of KORALUX towel rail radiators.
PDF, 165 kB)Technical Data
Steel tubes Ø 20 mm |
Height H | 700, 900, 1220, 1500, 1820 mm | |
| Length L | 450, 600, 750 mm | ||
| Depth B | 30 mm | ||
| Connecting pitch | h = L - 30 mm | ||
| Connecting thread | 4 × G½ (inside) | ||
| Highest allowed working pressure | 10 bar | ||
| Test pressure | 13 bar | ||
| Maximum water temperature | 110 °C | ||
| Flow coefficient | AT = 2,1 × 10-4 m2 | ||
| Coefficient of resistance (DN 15) | ξT = 1,8 |
Types of Connection
 |
 |
 |
 |
| bottom connection | double-sided from the top down | ||
Mounting
The mounting set is delivered as standard and consists of 4 special plastic brackets, screws, dowels and assembly instructions.
Overview of Types
| Typ KLC 700 | Typ KLC 900 | Typ KLC 1220 | Typ KLC 1500 | Typ KLC 1820 |
|---|---|---|---|---|
 |
 |
 |
 |
 |
Pressure Loss
The pressure loss of the radiator for the respective working conditions can be calculated by means of the value of the flow coefficient AT or the resistance coefficient ξT (see please the Technical Parameters).
