KORADO, a.s.KORALUX RONDO MAX - Towel Rail Radiator
Description
The towel rail radiators KORALUX RONDO MAX are produced from closed steel profiles with a D-shaped cross section and curved profiles with a circular cross section. The connecting pitch is derived from the length of the radiator. The radiators are delivered with a set for wall mounting, including an air vent and blanking plugs.
They can also be used for combined heating.
The direct electric radiator KORALUX RONDO MAX – E is also available.
Their design enables the drying of textiles. This is why the KORADO offer now includes towel hangers and pegs which extend the practical use of KORALUX towel rail radiators.
PDF, 0,68 MB)Technical Data
Steel tubes Ø 24 mm |
Height H | 690, 900, 1215, 1495, 1810 mm | |
| Length L | 445, 595, 745 mm | ||
| Depth B | 61, 68, 74 mm | ||
| Connecting pitch | h = L - 30 mm | ||
| Connecting thread | 4 × G½ inside | ||
| Highest allowed working pressure | 10 bar | ||
| Test pressure | 13 bar | ||
| Maximum water temperature | 110 °C | ||
| Flow coefficient | AT = 2,1 × 10-4 m2 | ||
| Coefficient of resistance (DN 15) | ξT = 1,8 |
Types of Connection
 |
 |
 |
 |
| bottom connection | double-sided from the top down | ||
Mounting
The mounting set is delivered as standard and consists of 4 special plastic brackets, screws, dowels and assembly instructions.
 |
Overview of Types
| Type KRM 700 | Type KRM 900 | Type KRM 1220 | Type KRM 1500 | Type KRM 1820 |
|---|---|---|---|---|
 |
 |
 |
 |
 |
Pressure Loss
The pressure loss of the radiator for the respective working conditions can be calculated by means of the value of the flow coefficient AT or the resistance coefficient ξT (see please the Technical Parameters).
