KORADO, a.s.KORALUX STANDARD - Towel Rail Radiator
Description
The towel rail radiators KORALUX STANDARD are produced from closed steel profiles with a D-shaped cross section and straight profiles with a circular cross section. The connecting pitch is derived from the length of the radiator.
The radiators are delivered with a set for wall mounting, including an air vent and blanking plugs.
You will find the smallest towel rail radiators on the market in this range. With a width of 400 mm, they are ideal for use in small bathrooms or as an alternative heat source suitable for combination with another type of heating, for example, under-floor heating. You will appreciate the presence of this radiator in your bathroom, toilet and other small areas.
- Heat output and basic technical parameters (
PDF, 149 kB)
Technical Data
Steel tubes Ø 20 mm |
Height H | 700, 900, 1220, 1500 mm | |
| Length L | 400, 500, 600 mm | ||
| Depth B | 30 mm | ||
| Connecting pitch | h = L - 30 mm | ||
| Connecting thread | 4 × G½ (inside) | ||
| Highest allowed working pressure | 10 bar | ||
| Test pressure | 13 bar | ||
| Maximum water temperature | 110 °C | ||
| Flow coefficient | AT = 1,6 × 10-4 m2 | ||
| Coefficient of resistance (DN 15) | ξT = 3,1 |
Types of Connection
 |
 |
 |
 |
| bottom connection | double-sided from the top down | ||
Mounting
The mounting set is delivered as standard and consists of 4 special plastic brackets, screws, dowels and assembly instructions.
Overview of Types
| Typ KS 700 | Typ KS 900 | Typ KS 1220 | Typ KS 1500 |
|---|---|---|---|
 |
 |
 |
 |
Pressure Loss
The pressure loss of the radiator for the respective working conditions can be calculated by means of the value of the flow coefficient AT or the resistance coefficient ξT (see please the Technical Parameters).
