KORADO, a.s.RADIK VKL - Steel Panel Radiator
Description
RADIK VKL is a steel panel radiator in VENTIL KOMPAKT version which allows left bottom connection to a pressurized heating system. Two upper and two lower hangers are welded at the back of the radiator. Radiators 1800 mm and longer have six hangers.
- Recommended Equipment
- Heat Output (
PDF, 509 kB) - Basic Technical Parameters ( PDF, 182 kB)
- RADIK Calculation of heat output
- Radiator accessories RADIK
Technical Data
| Height H | 300, 400, 500, 600, 900 mm | ||
| Length L | 400, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600, 1800, 2000, 2300, 2600, 3000 mm |
||
| Depth B | |||
| - Type 10 VKL | 47 mm | ||
| - Type 11 VKL | 63 mm | ||
| - Type 20 VKL | 66 mm | ||
| - Type 21 VKL | 66 mm | ||
| - Type 22 VKL | 100 mm | ||
| - Type 33 VKL | 155 mm | ||
| Connecting pitch | 50 mm | ||
| Connecting thread | 6 x G½ inside | ||
| Maximum working pressure | 10 bar | ||
| Maximum working temperature | 110 °C | ||
| Radiator connection | left bottom | ||
Types of Connection
 |
| Left bottom φ = 1 |
Overview of Types
| Type 10 VKL |  |
|---|---|
| Type 11 VKL |  |
| Type 20 VKL |  |
| Type 21 VKL |  |
| Type 22 VKL |  |
| Type 33 VKL |  |
Pressure Loss
In case of two-pipe heating system it is necessary to calculate the correct level of valve presetting and specify this in the project documentation to ensure a proper function of the heating system. This must be kept by the installer during installation of the heating system.
In case of one-pipe heating system it is necessary to set the valve at level 6. For adjusting the required mass flow in the radiator we recommend to use the compact connecting fitting with a fixed or adjustable flow volume of water in the radiator.
