KORADO, a.s.RADIK COMBI VK - Steel Panel Radiator
Description
RADIK COMBI VK is a panel radiator in VENTIL KOMPAKT design allowing a right bottom connection to the pressurized heating system. RADIK COMBI VK is designed for a combined installation with the electric heating element. This combination produces a panel radiator suitable for combined heating (hot water - electricity) which can be used independently from the operation of the heating system. On the part of the electric installation the electric heating element does not require any special arrangements in the heated room. It is recommended to install it together with the radiator.
There are two upper and two lower hangers welded at the back of the radiator. Blanking plugs, an air vent, a valve with a pre-set flow rate covered by a plastic cap are delivered as standard.
- Mounting
- Recommended Equipment
- Heat output and basic technical parameters (
PDF, 99 kB) - RADIK Calculation of heat output
Technical Data
| Height H | 500, 600 mm | ||
| Length L | 800, 1000, 1200, 1400, 1600 mm | ||
| Connecting pitch | 50 mm | ||
| Connecting thread | 5 x G½ inside | ||
| Maximum working pressure | 10 bar | ||
| Maximum working temperature | 110 °C | ||
| Radiator connection | right bottom |
Types of Connection
| Connection to the water heating system | Usage as a direct electric radiator |
 |
 |
| Right bottom φ = 1 |
The valve of the radiator is closed |
Overview of Types
| Type 22 COMBI VK |  |
|---|
Pressure Loss
In case of two-pipe heating system it is necessary to calculate the correct level of valve presetting and specify this in the project documentation to ensure a proper function of the heating system. This must be kept by the installer during installation of the heating system.
In case of one-pipe heating system it is necessary to set the valve at level 6. For adjusting the required mass flow in the radiator we recommend to use the compact connecting fitting with a fixed or adjustable flow volume of water in the radiator.
