KORADO, a.s.RADIK PLAN VK - Steel Panel Radiator
Description
RADIK PLAN VK is a steel panel radiator in VENTIL KOMPAKT version which allows right bottom connection to a pressurized heating system. Two upper and two lower hangers are welded at the back of the radiator. Radiators 1800 mm and longer have six welded hangers.
- Mounting
- Recommended Equipment
- Heat Output (
PDF, 509 kB) - Basic Technical Parameters ( PDF, 183 kB)
- RADIK Calculation of heat output
Technical Data
| Height H | 300, 400, 500, 600, 900 mm | ||
| Length L | 400, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600, 1800, 2000, 2300, 2600, 3000 mm |
||
| Depth B | |||
| - Type 10 PLAN VK | 49 mm | ||
| - Type 11 PLAN VK | 65 mm | ||
| - Type 20 PLAN VK | 68 mm | ||
| - Type 21 PLAN VK | 68 mm | ||
| - Type 22 PLAN VK | 102 mm | ||
| - Type 33 PLAN VK | 157 mm | ||
| Connecting pitch | 50 mm | ||
| Connecting thread | 6 x G½ inside | ||
| Maximum working pressure | 10 bar | ||
| Maximum working temperature | 110 °C | ||
| Radiator connection | right bottom | ||
Types of Connection
 |
| Right bottom φ = 1 |
Overview of Types
| Type 10 PLAN VK |  |
|---|---|
| Type 11 PLAN VK |  |
| Type 20 PLAN VK |  |
| Type 21 PLAN VK |  |
| Type 22 PLAN VK |  |
| Type 33 PLAN VK |  |
Pressure Loss
In case of two-pipe heating system it is necessary to calculate the correct level of valve presetting and specify this in the project documentation to ensure a proper function of the heating system. This must be kept by the installer during installation of the heating system.
In case of one-pipe heating system it is necessary to set the valve at level 6. For adjusting the required mass flow in the radiator we recommend to use the compact connecting fitting with a fixed or adjustable flow volume of water in the radiator.
