RADIK radiators - KORADO, a.s.

RADIK radiators by KORADO

RADIK radiators represent a guarantee of quality. KORADO, a. s. has held a quality certificate pursuant to the ISO 9001 norm since 1997. This quality management system describes in advance all conditions, requirements and parameters for RADIK radiators from a technical, production, commercial, transport and service point of view. Customer satisfaction is the main aim of the whole system, influencing KORADO’s goals and plans.

The ISO 9001:2000 quality management system guarantees customers a high and permanent quality of products and services.

The high quality of the products from KORADO is also confirmed by the company having been granted the right to use the national quality marks RAL, BSI and NF from demanding European markets. Quality marks from other important markets are also available, for example the Russian one with the GOST mark. These quality marks declare that the set requirements on quality of material, construction and production of RADIK and KORALUX radiators are constantly being met and subjected to regular checks.

The ISO 9001:2000 quality management system, in combination with quality marks, guarantees the highest possible level in achieving the quality of our radiators and all of the activities of KORADO on the European and global markets.

RADIK radiators are steel panel radiators with natural flow of air around their heat transfer surfaces. RADIK radiators are produced in a single, double or triple panel design. The primary heat transfer surface of the radiator is made up of a shaped plate with horizontally and vertically alligned channels. In order to increase the heat output of the RADIK radiator, additional convector fins are welded to the inner side of the panel on some types.

The panel for RADIK radiators is produced from two pressed shells of sheet steel which are welded to the vertical channels with spot welds and around the perimeter with seam welds. Cold-rolled sheet steel with a low carbon content is used, which corresponds to FePO1 class according to EN 10130 and EN 10131.

The additional convector fins are shaped from sheet steel and are spot welded to the vertical channels of the panel on the air side. This arrangement has a very beneficial effect on the natural flow of air around the area of RADIK radiators