KORABASE - NEW
The heat exchangers KORABASE are the heart of convectors. However, its application is much wider. Imagine that you would like your heating elements to completely blend with the interior. Build your exchangers into materials, the entire interior of which is compactly created, and into places where you want to have them. A real design solution that will fulfi l even the most exacting notions of preserving the interior design.
Al/Cu heat exchanger with low water content KORABASE
It is suitable for individual installation, especially in places where compactness of interior is required in terms of materials used. If certain conditions are adhered to, the KORABASE heat exchangers can be covered with almost any material to integrate them unobstrusively into the space. The exchanger is made of copper pipes and aluminium lamellas.
|Width (mm)||50, 100, 150, 200|
|Length (mm)||800 - 3000 (at 200 mm steps)|
|Max. working pressure (bar)||12|
|Max. working temperature (°C)||110 °C|
|Connecting thread||inner G 1/2“|
|Heat output (W)||by the exchanger covering height, see the output and correction factors tables for a variant case height|
Version of convectors KORABASE - NEW
Heat output [W]
Heat output calculated to ∆T= 50; (t1/t2/ti = for 75/65/20 °C)
|∆T = 50 °C||Length|
Correction factor for a different case height H
|The case height H (m) is taken from the bottom edge of the heat exchanger lamellas. Example: conversion of the heat output of the OR-J3/-180 exchanger to the output in a case 0,45 m high. Q = 1672 x 1,278 = 2137 W|
Correction factor of the cover grid´s flow surface
|% of flow surface||> 75||60||50||40||30|
|The flow surface means the flow surface of the heat exchanger (widthxlength of the radiator) minus the area of the breathing grid (all dimensions given in %). The heat output of the particular convector is multiplied by this correction factor. Measurements of the performances of the Licon products include the breathing grid, therefore it is not necesery to further recalculate them.|
Mounting and accessories
We would like to invite you to the exhibition display of KORADO company at the trade fair ISH 2019
Higher heat outputs and smarter design of KORALINE bench convectors
Create a print of the panel radiator exactly according to your wish. Easily, quickly, comfortably.