Electrical regulation elements
SIEMENS RAB 11
- room thermostat with a speed switch
- switching between heating and cooling
- manual switching of the fan speed
- voltage 24 to 250 v AC, current 0,2 to 6 (2) A
- temperature setting range 8 to 30 °C
- degree of protection class IP 30
- dimensions w × h × d (mm) – 96 × 110 × 35,4
SIEMENS RDF 600/IR
- room thermostat with a display and weekly program for two/four-pipe fan-coil units
- automatic switching between heating/cooling
- manual or automatic 3-stage fan speed control
- operating voltage AC 230 v, current loading max. 4 (2) A
- setting range of the required temperature 5 – 40 °C
- switching hystereses adjustable in the range of 0.5 to 4 K
- possibility of connection of a separate sensor e.g. for applications in a wet environment
- possibility to control the control valve with the use of a thermoelectric actuator
- degree of protection class IP 30
- dimensions w × h × d (mm) – 86 × 86 × 57
SIEMENS RDG 100T
- room thermostat with a display and weekly program for two/four-pipe fan-coil units
- automatic switching between heating/cooling
- manual or automatic 3-stage fan speed control
- operating voltage AC 230 v, current loading max. 5 (4) A
- setting range of the required temperature 5 - 40 °C
- switching hystereses adjustable in the range of 0.5 to 6K
- possibility of connection of a separate sensor e.g. for applications in a wet environment
- possibility of control using the infrared remote control
- wide range of accessories, modern design
- degree of protection class IP 30
- dimensions w × h × d (mm) – 93 × 128 × 30
SIEMENS IRA 211
- infrared remote control
- for RDF 600/IR and RDG 100T
- operation type selection
- temperature setting
- fan speed selection
- compatible for use with the RDF 600, RDG 100T thermostats
- power supply 2 × 1.5 v, AAA type
- degree of protection class IP 30
- dimensions w × h × d (mm) – 42 × 106 × 18
Room temperature sensor QAA32
- to measure space temperature in systems of heating, where it is not possible to place a thermostat
- suitable for pool application installations
- can be connected to thermostats RDF 600, RDG 100T
- measurement range: 0 - 40 °C, accuracy of measurement at 25 °C ± 0,3 K
- measuring sensor - NTC, 3 kΩ at 25 °C
- safety class II according to EN 60 730, degree of protection IP 30 according to EN 60 529
- dimensions w × h × d (mm) – 96,4 × 99,6 × 36
DC power supply source 60 W, 100 W and 480 W
- switching DC power supply
- noiseless operation, high efficiency
- DIN rail mounting
- degree of protection class IP 20
For 12 V:
Model | DR-60-12 | DR-100-12 |
---|---|---|
Power supply size | 60 W | 100 W |
Input control voltage | 230 V AC/0,88 A | 230 V AC/1,6 A |
Heat output voltage | 12 V DC/4 A | 12 V DC/6,5 A |
Dimensions w x h x d (mm) | 78 x 93 x 56 | 100 x 93 x 56 |
For 24 V:
Model | DR-100-24 | DR-480-24 |
---|---|---|
Power supply size | 100 W | 480 W |
Input control voltage | 100-240 V AC/3 A | 100-240 V AC/5 A |
Heat output voltage | 24 V DC/4,2 A | 24 V DC/20 A |
Dimensions w x h x d (mm) | 100 x 93 x 56 | 89 x 126 x 129 |
R-Box
- input voltage: 230 v / 50 Hz
- output signal: 0 to 10 v / 1 kΩ
- galvanically separated 4 kv AC – optocouplers
- degree of protection: IP 20
- instalation on the DIN rail in the switchboard
- incorporates speed signal galvanic separator module
- operating ambient termperature: 0 - 40 °C
- dimensions w × h × d (mm) – 52 × 23 × 40
Installation box
- wall built-in
- used for the DC power supply source installation and the R-Box in cases, where the installation in switchboard is not possible
- IP 40
- dimensions w × h × d (mm) – 258 × 318 × 72
Heating control elements (cooling) medium
Thermoelectric drive
- power supply voltage:
- 12 V DC/150 mA/1,8 W
- 24 V DC/84 mA/2W
- CLOSED without power supply
- degree of protection: IP 54
- connection cable 2 × 0,75 mm2, length 1 m
- closing / opening time < 3 min.
Thermostatic head fluid with capillary
- regulation range +6.5 to +28 °C
- installation of the actuator into the wall
- length of capilary 5 m
- hysteresis: ≤ 0,6 °C
Thermostatic valve
- straight or corner section (according to the order)
- with preset Kv value
- dimension 1/2" G
- connection dimension of the head M 30 × 1,5
- material – nickel-plated brass
- maximum operating pressure PN 10
- maximum operating temperature 90 °C
Shut-off valve
- straight or corner section (according to the order)
- dimension 1/2" G
- material – nickel-plated brass

System for low energy heating

Optimized convection

Other products
News

From Česká Třebová to the whole world. KORADO celebrates 30 years this year!
16. 10. 2020
The establishment of Koventa in 1965 also in fact means the beginning of the history of KORADO.

Inserted valve Eclipse for steel panel radiators KORADO
6. 10. 2020
All steel panel radiators RADIK in version VENTIL KOMPAKT and design radiators KORATHERM HORIZONTAL VKM can be additionally fitted with a valve Eclipse 4381 made by IMI company.

Innovation of KORALINE bench convectors
18. 4. 2018
Higher heat outputs and smarter design of KORALINE bench convectors

Heat recovery efficiency up to 90 %?
26. 4. 2017
Local ventilation unit KORASMART TUBE with heat recovery