Installation KORALINE LD with desk
Assembly procedure
Fix the brackets to the floor (see assembly manual for mounting dimensions). Install the heat exchanger on top of the brackets and connect it to the water system. Cover with the casing and fix to the brackets. For detail information see the assembly manual. For correct function and maximum output, heat units must be filled after assembly with heating medium and properly bled.
Bench convectors with a board for wet environment
Convectors designed for use at pool areas must be kept clean and washed with clean water on a regular basis. For a wet environment, we suggest the version Exclusive, with a cover panel made of American walnut.
Attention!
Boards are made from natural materials. Therefore, minor variations in colour can occure. The supplier cannot fully guarantee the colours displayed and accept claims due to eventual colour variations. After installing, the board is fixed on sides to prevent undesirable movement.
Contents of the set for connection of KORALINE LD
Axial thermostatic valve
standard supply content
- maximum operating pressure: PN 10
- maximum operating temperature 120 °C
- connection type: M 30 × 1,5
- connection – piping: 1/2"
- connection – body: 1/2" – gasket O-ring
- Kvs: 0,8
| Preset | 1 | 2 | 3 | 4 | 5 | 6 |
|---|---|---|---|---|---|---|
With a thermostatic head 2K (m3/h) | 0,10 | 0,20 | 0,30 | 0,40 | 0,50 | 0,60 |
Without a thermostatichead KVS (m3/h) | 0,10 | 0,20 | 0,30 | 0,40 | 0,57 | 0,80 |
This valve type is part of the accessories for all convectors KORALINE.
Extension piece
standard supply content
- it is used to adjust the height between the input and output of the fittings at multiple-line exchangers
- brass version
connection thread G 1/2" female- gasket O-ring
Note: The connecting set elements are packed as a complete set and cannot be supplied separately.
Assembly instruction
Assembly instructions - Koraline LD with desk - OLD TYPES