KORAFLEX FW 13/34
Floor convector with forced convection for heating and cooling
depth 13 cm, width 34 cm
- used for heating and cooling of rooms
- high heating and cooling output
- four-pipe system
- stainless-steel case for condensate drain
- controls possible through BMS (Building Management System)
- the convector is intended for dry environment
* For all manufactured lengths of KORAFLEX FW 13/34 the average distance for the connection is 195 mm.
* In case of floor convector KORAFLEX FW 13/34 the linear floor grid could not be manufactured as a standard product. Previous consultation is necessary and if possible the convector case is adapted.
Download
See more
Heating
Forced convection
Quiet operation
Dry-cooling
Environmentally friendly
Minimal consumption of energy
Higher performanceTechnical Data
| Width including the U/F type frame U/F (mm) | 344U/374F |
|---|---|
| Floor case width (mm) | 298 |
| Grid width (mm) | 330 |
| Max. adjustable height (V max. mm) | 133 - 160 |
| Case height (mm) | 133 |
| Length (mm) | 1200, 1500 - 3000 (at 500 mm steps) |
| Exchanger height (mm) | 75 |
| Exchanger width (mm) | 150 |
| Fans impeller diameter (mm) | 60 |
| Connection to the rating system | 2 x G 1/2" inner |
| Case material | galv.steel, stainless steel 304,316 |
Version of convectors KORAFLEX FW 13/34
Economicblack coated galvanized steel with inner stainless steel case AISI 316, the heat exchanger without surface finish
Exclusiveblack coated zinc galvanised steel case, black coated exchanger **
Inoxstainless steel unpainted case AISI 304, unpainted exchanger (for dry environment only)**Heat output [W]
Heat output calculated to ∆T= 50; (t1/t2/ti = for 75/65/20 °C)
| Width [mm] | 340 | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Depth [mm] | 130 | ||||||||||||||||||||||
| Length [mm] | 1200 | 1500 | 2000 | 2500 | 3000 | ||||||||||||||||||
| Max. intake/voltage DC | 9,5/12-24 | 14/12-24 | 18,5/12-24 | 23/12-24 | 27,5/12-24 | ||||||||||||||||||
| Noisiness – sound pressure 1 m Lp (A) | 0 | 28,6 | 33,1 | 39,3 | 0 | 28,9 | 33,5 | 39,8 | 0 | 29,3 | 34 | 40,4 | 0 | 29,6 | 34,4 | 40,9 | 0 | 29,9 | 34,8 | 41,4 | |||
| Switch position | Off | 1 | 2 | 3 | Off | 1 | 2 | 3 | Off | 1 | 2 | 3 | Off | 1 | 2 | 3 | Off | 1 | 2 | 3 | |||
| ∆T50 | 234 | 1557 | 2067 | 2577 | 337 | 2244 | 2979 | 3714 | 509 | 3389 | 4499 | 5609 | 681 | 4534 | 6019 | 7504 | 853 | 5678 | 7538 | 9398 | |||
| Cooling output [W] | |||||||||||||||||||||||
| Input / output | t1 °C | Humidity % | |||||||||||||||||||||
| 6/12°C | 28 | 50 | - | 457 | 591 | 726 | - | 659 | 852 | 1046 | - | 995 | 1287 | 1580 | - | 1331 | 1722 | 2113 | - | 1668 | 2157 | 2647 | |
| 6/12°C | 26 | 50 | - | 406 | 525 | 644 | - | 585 | 757 | 929 | - | 884 | 1143 | 1403 | - | 1182 | 1529 | 1876 | - | 1481 | 1915 | 2350 | |
| 6/12°C | 24 | 50 | - | 355 | 459 | 563 | - | 511 | 661 | 811 | - | 772 | 999 | 1225 | - | 1033 | 1336 | 1639 | - | 1294 | 1674 | 2053 | |
| 8/14°C | 28 | 50 | - | 406 | 525 | 644 | - | 585 | 757 | 929 | - | 884 | 1143 | 1403 | - | 1182 | 1529 | 1876 | - | 1481 | 1915 | 2350 | |
| 8/14°C | 26 | 50 | - | 355 | 459 | 563 | - | 511 | 661 | 811 | - | 772 | 999 | 1225 | - | 1033 | 1336 | 1639 | - | 1294 | 1674 | 2053 | |
| 8/14°C | 24 | 50 | - | 304 | 393 | 482 | - | 438 | 567 | 695 | - | 661 | 856 | 1050 | - | 885 | 1145 | 1405 | - | 1108 | 1434 | 1759 | |
| 10/15°C | 28 | 50 | - | 369 | 478 | 586 | - | 532 | 688 | 845 | - | 804 | 1040 | 1276 | - | 1075 | 1391 | 1707 | - | 1347 | 1742 | 2137 | |
| 10/15°C | 26 | 50 | - | 318 | 412 | 505 | - | 459 | 594 | 728 | - | 693 | 897 | 1100 | - | 927 | 1199 | 1472 | - | 1161 | 1502 | 1843 | |
| 10/15°C | 24 | 50 | - | 268 | 346 | 425 | - | 386 | 499 | 612 | - | 582 | 754 | 925 | - | 779 | 1008 | 1237 | - | 976 | 1263 | 1549 | |
Temperature exponent m=1,147
Mounting and accessories
General information
Weights and water volumes
| Type | 13/34 |
| kg/bm | 14,5 |
| Stainless steel kg/lm | 12,2 |
| I/1lm heat output | 0,3 |
| I/1lm cooling output | 1,0 |
Other products
News
Invitation to ISH 2019
4. 2. 2019
We would like to invite you to the exhibition display of KORADO company at the trade fair ISH 2019
Innovation of KORALINE bench convectors
18. 4. 2018
Higher heat outputs and smarter design of KORALINE bench convectors
The new Designer of the panel radiator print
8. 2. 2018
Create a print of the panel radiator exactly according to your wish. Easily, quickly, comfortably.
Heat recovery efficiency up to 90 %?
26. 4. 2017
Local ventilation unit KORASMART TUBE with heat recovery