KORAFLEX FV 11/34

Floor convector with forced convection

depth 11 cm, width 34 cm
  • used for heating
  • achieves high heat outputs
  • low noise even in max. rpm
  • possibility of control through BMS (Building Management System)
  • the convector is intended for dry environment
Heating Heating
Forced convection Forced convection
Quiet operation Quiet operation
Environmentally friendly Environmentally friendly
Minimal consumption of energy Minimal consumption of energy
Higher performance Higher performance

Technical Data

Width including the U/F type frame U/F (mm)344U/374F
Floor case width (mm)295
Grid width (mm)330
Max. adjustable height (V max. mm)115 - 142
Case height (mm)115
Length (mm)800 - 2 800 (at 400 mm steps)
Exchanger height (mm)50
Exchanger width (mm)180
Exchanger effective length (mm)L - 350
Fans impeller diameter (mm)40
Connection to the rating system2 x G 1/2" inner
Case materialgalv.steel,stainless steel AISI 304

Version of convectors KORAFLEX FV 11/34

EconomicEconomicblack coated zinc galvanised steel case, heat exchanger without any surface finish
ExclusiveExclusiveblack coated zinc galvanised steel case, black coated exchanger**
InoxInoxstainless steel unpainted case AISI 304, unpainted exchanger (for dry environment only)**

Heat output [W]

Heat output calculated to ∆T= 50; (t1/t2/ti = for 75/65/20 °C)

Width [mm] 340
Depth [mm] 110
Length [mm] 800 1200 1600 2000 2400 2800
Max. intake/voltage DC 5,5/12-24 11/12-24 12/12-24 20/12-24 22,5/12-24 23,5/12-24
Noisiness – sound pressure 1 m Lp (A) 0 16,1 23,6 30,5 0 16,4 24,1 30,9 0 16,7 24,4 31,1 0 17,2 25 31,4 0 17,4 25,1 31,7 0 17,7 25,3 31,7
Switch position Off 1 2 3 Off 1 2 3 Off 1 2 3 Off 1 2 3 Off 1 2 3 Off 1 2 3
∆T50 160 715 915 1116 302 1350 1729 2109 444 1985 2543 3101 586 2620 3357 4093 728 3255 4171 5086 870 3891 4984 6078

Temperature exponent m = 1,1

Contact usUp
+420 465 506 777 Email us