KORAFLEX FV 8/28

Floor convector with forced convection

depth 8 cm, width 28 cm
  • convector with the lowest construction height
  • used for heating
  • quietest operation at low speed
  • possibility of control through BMS (Building Management System)
  • the convector is intended for dry environment
Heating Heating
Forced convection Forced convection
Quiet operation Quiet operation
Environmentally friendly Environmentally friendly
Minimal consumption of energy Minimal consumption of energy
Higher performance Higher performance

Technical Data

Width including the U/F type frame U/F (mm)284U/314F
Floor case width (mm)235
Grid width (mm)270
Max. adjustable height (V max. mm)80 - 107
Case height (mm)80
Length (mm)800 - 2 800 (at 400 mm steps)
Exchanger height (mm)50
Exchanger width (mm)120
Exchanger effective length (mm)L - 350
Fans impeller diameter (mm)30
Connection to the rating system2 x G 1/2" inner
Case materialgalv.steel, stainless steel AISI304

Version of convectors KORAFLEX FV 8/28

Economic Economic black coated zinc galvanised steel case, heat exchanger without any surface finish
ExclusiveExclusiveblack coated zinc galvanised steel case, black coated exchanger**
InoxInoxstainless steel unpainted case AISI 304, unpainted exchanger (for dry environment only)**

Heat output [W]

Heat output calculated to ∆T= 50; (t1/t2/ti = for 75/65/20 °C)

Width [mm] 280
Depth [mm] 70
Length [mm] 800 1200 1600 2000 2400 2800
Max. intake/voltage DC 3/12-24 5,5/12-24 7,5/12-24 10/12-24 13/12-24 15/12-24
Noisiness – sound pressure 1 m Lp (A) 0 13,2 23 31,1 0 13,4 23,1 31,6 0 13,8 23,7 31,8 0 14,7 26 32,8 0 15 26,5 33 0 15,1 26,7 33,1
Switch position Off 1 2 3 Off 1 2 3 Off 1 2 3 Off 1 2 3 Off 1 2 3 Off 1 2 3
∆T50 138 351 415 601 200 662 785 1136 229 971 1154 1670 302 1285 1523 2204 356 1597 1892 2739 410 1909 2261 3273

Temperature exponent m = 1,1159

Contact usUp
+420 465 506 777 Email us