KORAWALL WI convectors with forced convection
Developed for low temperature heating systems, high efficiency guaranteed also at very low temperature gradients, e.g. 35/30 °C. Ideal everywhere where the heat source is a heat pump, a solar system, a condensation boiler or as a supplementary source of heat for fl oor heating, particularly during a transitional period or when an instant temperature increase in the room is required. At the same time suitable for rooms' dry-cooling during the summer months. All of this with the benefi ts of the Optimized Convection system – low noise and low fan input while maintaining maximally attainable performances.
Univeral use – heating and dry-cooling!
Wall-mounted convector with forced convection KORAWAL WI 45/11
height 45 cm, depth 11 cm
- used for heating or dry-cooling
- high efficiency even at low temperatures of the heating system
- patented design solutions
- high-perfomance, low energy and quiet fans
- the same regulation as the one for floor convectors KORAFLEX FV and free standing convector with forced convection KORALINE LV
- two-pipe system
- right bottom connection
- possibility of control through BMS
- the convector is intended for dry environment
|Length (mm)||750 - 2000 (at 250 mm steps)|
|Heat output (W)||106|
|Exchanger height (mm)||240|
|Exchanger width (mm)||100|
|Fans impeller diameter (mm)||60|
|Connection to the rating system||inner G 1/2“|
|Types of Connection||recommended bottom connection, right|
Version of convectors KORAWALL WI
Heat output [W]
Heat output calculated to ∆T= 50; (t1/t2/ti = for 75/65/20 °C)
|Max. intake/voltage DC||5,5/12-24||8/12-24||9,5/12-24||14/12-24||16/12-24||18,5/12-24|
|Noisiness – sound pressure 1 m Lp (A)||0||23,1||31,3||38||0||23,4||31,7||38,5||0||23,7||32,1||39||0||24||32,5||39,5||0||24,4||33||40,1||0||24,7||33,4||40,6|
|Cooling output [W]|
|Input / output||t1 °C||Humidity %|
Temperature exponent m = 1,062
The establishment of Koventa in 1965 also in fact means the beginning of the history of KORADO.
All steel panel radiators RADIK in version VENTIL KOMPAKT and design radiators KORATHERM HORIZONTAL VKM can be additionally fitted with a valve Eclipse 4381 made by IMI company.