Stainless steel grilles

Cover grille and decorative frames

Take care with every detail and choose from a wide range of floor grille of the floor convectors, so that they are the top complement of the interior. Intentionally visible or quietly blending into its environment. The grilles are the same for all types of the floor convectors: KORAFLEX FK, FK InPool, FV, FV InPool, FI and FW. Wide selection of lengths, special surface finishes in the rolling or longitudinal designs.

Stainless steel - Rolling                                          Linear*

* Ordering of the linear floor grill is only possible with the appropriate convector

The frame is not part of the cover grille but part of the convector.

The rolling design is siutable only for dry environment (material AISI 304)

The floor grilles are made of natural materials and therefore minor deviations in the colour design cannot be eliminated. The supplier cannot fully guarantee the presented colours and accept claims due to possible colour deviations.

Supporting elements under the longitudinal grid

If you order a longitudinal Stainless steel cover grid, the supporting elements will be included in the grid package.

Stainless steel Cross*

* Ordering of the aluminium linear floor grill is only possible with the appropriate convector

Luxury finish

The stainless steel grille including the decorative frame is of the same material as the walkable grille. High level of design, high load bearing capacity, possible choice of design:

  • dry environment stainless steel AISI 304
  • humid environment stainless steel AISI 316

Floor convectors including the grille intended for use in the pool area (AISI 316) must be kept clean and washed regularly with clean water and maintained with suitable preparations for the preservation of the stainless steel.

The cover grille stainless steel Cross is designed for the case type P0. The stainless steel Cross up to 2 m length is supplied in one piece; above 2 m the grille is divided.

The floor grilles are made of natural materials and therefore minor deviations in the colour design cannot be eliminated. The supplier cannot fully guarantee the presented colours and accept claims due to possible colour deviations.

Cover grilles load bearing capacity

* Point load on 1 grille lamella according to produced widths.

Correction factor per flow area of the grille

of flow surface> 7560504030
correction factor1,000,950,900,850,60

The flow surface means the flow surface of the heat exchanger (width × length of the radiator) minus the area of the cover grille (all dimensions given in %). The heat output of the particular convector is multiplied by this correction factor. Measurements of the KORAFLEX products performances include the cover grille, therefore no further recalculation is necessary.

Manufacturing dimensions of the cover grilles

Code designationPM-xx/16PM-xx/20PM-xx/28PM-xx/34PM-xx/42
width150 mm190 mm270 mm330 mm410 mm

tolerance +0–1,5 mm

Profiles of the aluminium frames

The convectors are fitted as standard with the silver U profile; when frame F is ordered it is enclosed with the delivery loose. Colour finishes of the decorative frames match the colour finishes of the aluminium grilles.

Assembly instruction

Assembly instruction - Cover grilles KORAFLEX

 

Ordering codes

Ordering codes of floor grilles

Contact usUp
+420 465 506 777 Email us