KORALUX STANDARD

Towel rail radiators ideal for use in small bathrooms or as an alternative suitable for combination with other heat sources

Towel rail radiators KORALUX STANDARD are produced from closed steel profiles with a D-shaped cross section and straight profiles with a circular cross section. The connecting pitch is derived from the length of the radiator. The radiators are delivered with a set for wall mounting, including an air vent and blanking plugs. You will find the smallest towel rail radiators on the market in this range. With a width of 400 mm they are ideal for use in small bathrooms or as an alternative heat source suitable for combination with another type of heating, for example, under-floor heating. You will appreciate the presence of this radiator in your bathroom, toilet and other small areas. They can also be used for combined heating.

Show full text
length from 400 to 600 mm

length from 400 to 600 mm

height from 700 to 1500 mm

height from 700 to 1500 mm

heat output from 198 to 567 W

heat output from 198 to 567 W

bottom connection, double-sided from the top down

bottom connection, double-sided from the top down

KORALUX STANDARD we offer these in 12 alternatives

Filter by parameters

Selection of dimensions

Enter required dimensions.

Heat output (For professionals)

t1: 75 °C
t2: 65 °C
ti: 20 °C
ΔT: 50 °C

The heat output of the radiator should cover the specified heat losses of the heated room, which are calculated by the designer. t1 – temperature of input water entering the radiator t2 – temperature of output water exiting the radiator ti – relative air temperature (design temperature of air in the room) (Temperatures t1 and t2 are based on the design documentation of the heating system or the selected heat source)

Select colour

Basic white

The basic colour is RAL 9016 white, other colours are subject to a surcharge.
It is possible to deviate the colour in the colour chart compared to the colour of the heating element.

Leave white

Free of charge

KORADO colour card

20 %

RAL colour card

30 %

Heating element

The heating element with integrated controller allows the temperature to be set using the controller that is part of the heating element. In the case of the variant without integrated controller, the rod operates in on / off mode. Accessories for easy operation can be purchased with this bar.

Type

Attention, the controller type has not yet been filled in!

Colour

Due to the selected color of the body, we recommend the color White
Please note, the colour of the controller has not been filled in yet!

Select alternative

Select all
Dimensions (H × L)
mm
Heat output
Tepelný výkon radiátoru má pokrýt stanovené tepelné ztráty vytápěné místnosti, které jsou vypočteny projektantem.
watt
Color
Code for ordering
Your selection
Dimensions (H × L) (mm)
700 × 400
Heat output (watt)
198
Color
White
Code for ordering
KSC-070040-00-10
Your selection
Dimensions (H × L) (mm)
700 × 500
Heat output (watt)
231
Color
White
Code for ordering
KSC-070050-00-10
Your selection
Dimensions (H × L) (mm)
700 × 600
Heat output (watt)
263
Color
White
Code for ordering
KSC-070060-00-10
Your selection
Dimensions (H × L) (mm)
900 × 400
Heat output (watt)
254
Color
White
Code for ordering
KSC-090040-00-10
Your selection
Dimensions (H × L) (mm)
900 × 500
Heat output (watt)
297
Color
White
Code for ordering
KSC-090050-00-10
Your selection
Dimensions (H × L) (mm)
900 × 600
Heat output (watt)
337
Color
White
Code for ordering
KSC-090060-00-10
Your selection
Dimensions (H × L) (mm)
1220 × 400
Heat output (watt)
345
Color
White
Code for ordering
KSC-122040-00-10
Your selection
Dimensions (H × L) (mm)
1220 × 500
Heat output (watt)
403
Color
White
Code for ordering
KSC-122050-00-10
Your selection
Dimensions (H × L) (mm)
1220 × 600
Heat output (watt)
458
Color
White
Code for ordering
KSC-122060-00-10
Your selection
Dimensions (H × L) (mm)
1500 × 400
Heat output (watt)
427
Color
White
Code for ordering
KSC-150040-00-10

Accessories

Title Description Code
branch T - Z-SKV-0009
T shaped branch.
Z-SKV-0009
Plug with switch - white - Z-SKV-0008-10
For electric heater when used in a socket.
Z-SKV-0008-10
Plug with switch - grey -  Z-SKV-0008-57
For electric heater when used in a socket.
Z-SKV-0008-57
Plug with switch - black - Z-SKV-0008-39
For electric heater when used in a socket.
Z-SKV-0008-39

Download or save your selection

Now save your chosen variant to you so that you can pass it on to the seller and thus speed up your purchase.
You will find the list of sellers in the next step.

Send by e-mail
Copy link

Technical information

Technical Data

KORALUX STANDARD | koralux_standard-01.png
H: Height (mm) 700, 900, 1220, 1500
L: Length (mm) 400, 500, 600
Highest allowed working temperature (°C) 110 °C
Highest allowed working pressure 10 bar
Connecting thread inside G½
Connecting pitch h = L - 30 mm

Heat output

Steel pipes Ø 20 mm
Steel profile 40 × 30 mm
Q [W] Height [mm]
Length (mm) 700 900 1220 1500
400 198 254 345 427
500 231 297 403 499
600 263 337 458 567

Technical drawing

Steel pipes Ø 20 mm
Steel profile 40 × 30 mm

Types of Connection

Bottom connection
KORALUX STANDARD - connection Bottom connection
Double-sided from the top down
KORALUX STANDARD - connection Double-sided from the top down
New
New!

Check out our new. Radiator suitable for heat pumps. RADIK V-POWER

That interests me
This website uses cookies.

We use cookies to personalize content and ads, provide social media features and analyze our traffic. We also share information about the use of our site with our social media, advertising and analytics partners. They may use the data together with other information they collect about you while using their services.

Settings
Allow all