KLASIK - R
Steel panel radiator for renovations
RADIK KLASIK – R is a steel panel radiator in KLASIK version modified for a quick replacement of cast-iron or steel column radiators with a connecting pitch of 500 mm.The height 554 mm guarantees its easy fitting in place of the old radiator.
It allows for left or right side connection to the heating system and it is designed for pressurized or gravity-fed heating systems. There are two upper and two lower hangers welded at the back side of the radiator. Radiators in length 1800 mm and more have six hangers.The wide range of types of RADIK KLASIK - R allows you to choose always the most suitable and appropriate length.
All radiators are supplied with:
- air vent
- blanking plug
- top grill
- side panels
|Height (H)||554 mm|
|Length (L)||400, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600, 1800, 2000 mm|
|- Type 20 R||66 mm|
|- Type 21 R||66 mm|
|- Type 22 R||100 mm|
|- Type 33 R||155 mm|
|Connecting pitch||h = 500 mm|
|Connecting thread||4 x G½ inside|
|Highest allowed working pressure||10 bar|
|Highest allowed working temperature (°C)||110 °C|
|Radiator connection||left or right side|
|Pressure Loss||The pressure loss of the radiator for the respective working conditions can be calculated by means of the value of the flow coefficient AT or the resistance coefficient ξT|
Heat output [W]
- t1 - input water temperature
- t2 - output water temperature
- ti - desired room temperature
For the conversion of heat outputs change the default values.
Heat output calculated to ∆T= 50; (t1/t2/ti = for 75/65/20 °C)
|Type 20 R||Type 21 R||Type 22 R||Type 33 R|
|Height [mm]||Height [mm]||Height [mm]||Height [mm]|
Mounting and accessories
Higher heat outputs and smarter design of KORALINE bench convectors
Create a print of the panel radiator exactly according to your wish. Easily, quickly, comfortably.